If you’re wondering whether your GE universal remote works with Roku, here’s the short answer: yes. Most GE remote controls pair successfully with Roku streaming sticks, streaming boxes, and Roku built-in smart TVs.
To get set up, you’ll need the correct GE universal remote code for Roku, listed under the CL3, CL4, or CL5 code lists depending on your remote version. Below, you’ll find a list of commonly used codes along with step-by-step programming instructions.
These codes also work with Roku-powered smart TVs from other brands, including Hisense, TCL, Philips, Insignia, and Hitachi. That means you don’t need a separate remote just to control the Roku interface on your smart TV.
GE Universal Remote Codes for Roku Sticks, Boxes, and Smart TVs
Only CL4 and CL5 GE remotes support Roku devices. If you’re using an older CL3 remote, it unfortunately won’t work — you’ll need to upgrade to a ByJasco CL5 remote, which typically costs under $15.
Try the codes below. They’ve been tested across multiple Roku devices, though results can vary slightly by TV model and firmware version.
| Roku Devices | GE CL4 & CL5 Codes |
|---|---|
| Roku Box | 2014, 4395, 0903 |
| Roku TV stick | 6171, 6001 |
| TCL Roku TV | 6171 |
| Hisense Roku TV | 6251 |
| Insignia Roku TV | 6171, 6381 |
| Sharp Roku TV | 6001, 6251, 6001 |
| Hitachi Roku TV | 6171 |
These are 4-digit codes. Your device must have a built-in IR sensor — whether it’s a streaming stick, streaming box, or smart TV — since GE remotes use infrared signals.
How to Program a GE Universal Remote to a Roku TV or Box
Before starting, make sure your remote has fresh batteries. Weak or flat batteries are one of the most common reasons pairing fails.
You’ll use either the STRM or TV button depending on your device:
- STRM — Use this for streaming devices like a Roku stick or Roku box.
- TV — Use this for smart TVs with the Roku app built in.
Steps:
- Press and hold the SETUP button until the red light turns on.
- Press the device category button — TV or STRM — based on your device type.
- Enter the 4-digit code from the table above.
- The red light will turn off once you’ve entered a valid code.
- Test the remote’s keys to confirm it’s working.
Note: This remote won’t replicate every feature of your original Roku remote, but it covers all the core functions and works well as a backup or budget replacement.
FAQ
What if the Roku code isn’t working with my GE remote?
First, check your remote’s model number. CL5 remotes are broadly compatible with Roku sticks, boxes, and smart TVs, while some devices only pair with CL4. You can confirm which devices your remote supports on the official ByJasco website. You can also try the auto code search method, which lets the remote scan for the correct code automatically.
Are there 3-digit or 5-digit codes available?
No — Roku pairing with GE remotes uses 4-digit codes only. Try each code from the list above until one pair succeeds.
How do I know if my GE remote is compatible with Roku?
Open the battery cover and check the label inside. If it says CL5, your remote is compatible. You can also check for a physical STRM button — if it’s missing, the remote likely won’t support Roku streaming devices. Some CL4 remotes are also compatible, depending on the device.
You may like:-
- How to program the Optimum streaming remote?
- How to program Colorways remote codes
- Magnavox universal remote codes
- Pavy remote codes list