Universal Remote Codes For Sanyo TV [GE, RCA, Philips, Etc]

Are you trying to program a third-party universal remote for Sanyo TV using a code? This is the exact place and I welcome you. Here I provide all of the universal remote codes for Sanyo TV.

The most common remote brands people use other than the original ones are General Electric (Also known as GE), RCA, Philips, One-For-All, BlackWeb, Onn, etc.

So, I provide the codes for all these well-known products, and in case I miss you or you can’t find the code that doesn’t match the remote control on your hand, don’t hesitate to mention it in the comment box.

As Sanyo TV is the most popular TV brand, the manufacturers have made sure that all of their TV models are designed and developed to be compatible with various universal remote control brands available in the market. If I am correct, all the models come with an IR sensor for communicating with the remote control.

What are the universal remote codes for Sanyo TV?

GE, RCA, and Philips universal remotes are the most popular and compatible with your Sanyo TV. So sharing all of the working codes here along with the pairing instructions. This will really help you.

GE universal remote Sanyo TV codes – CL4, CL5, and CL6

  • 1161
  • 5261
  • 2891
  • 5251

When you have new models available, feel free to use any of the 4 codes mentioned above. And I am sure that it’ll work like a charm.

When you have a very old model, such as the basic model CL3, you can use these codes – 5261, 5251, 2981, 2991, 3051, 0001, 0801, 1051

How to program the GE universal remote to Sanyo TV?

The GE remote setup process is entirely easy to implement. If you have done this before, you should know.

Press and hold down the SETUP button and wait till the RED light stays ON

Then press and release the TV button, the LED blinks once and remains ON

Now enter any one of the given codes (Based on the code list version number)

The LED will get turned OFF when the core entered is correct. Enjoy.

RCA universal remote codes for Sanyo TV

You should use the codes based on the RCA remote control revision numbers. However, I listed some of the common codes here.

  • 10054
  • 10154
  • 11142
  • 0154
  • 0159
  • 1142
  • 1136
  • 13488
  • 75315
  • 86916
  • 52215
  • 53311

The codes lookup tool [New Tool] will help you to find the codes according to the device type, device brand, and revision number.

How to use the Sanyo TV code to program an RCA remote?

Be ready for the controller with batteries to have sufficient charge. Find out the code from the booklet (You got along with the product) or from the online code library.

Press and hold down the TV button until the POWER button illuminates. Then by keeping the TV button hold on, enter the code, and it may be either a 4-digit or 5-digit.

Once you enter the code completely, the POWER button blinks once. If it has blinked in 4 times, the code entered is wrong. You should re-check it.

Note:- This process is applicable when you have an RCA remote with a backlit feature. In other models, the LED at the top of the remote will blink accordingly during the pairing process.

DirecTV remote codes for Sanyo TV

  • 11142
  • 10054
  • 10154
  • 10088
  • 11362

5-Digit codes are used in DirecTV remotes. The programming is a little bit different when compared to the RCA, and GE.

Press and hold the SELECT + MUTE keys until the LED on the remote blinks twice

Then enter the first digit of the code. For example, if you decide to use the code 11142, enter the digit 1.

Wait till the GREEN light on top blinks twice. After that, enter the remaining 4 codes. Here in this example, the remaining codes are 1142.

Point the remote to Sanyo TV, then press the OFF key to test whether the functionalities are working properly.

Philips universal remote codes for Sanyo TV

Byjasco is the code vendor for the Philips remote control. So that, you can use the same GE remote control codes to program this Philips remote controller.

In addition to 4-digit codes, there are a few 3-digit codes too.

4-Digit codes are here:- 1161 5261 2981 6171 2891 5251 2991 3051 1741 0001 0801 1051 1261 1531 1581 1911 2871 2881 3481 5001 5241

For CL4, CL5, and CL6 models :- 1161 5261 6171 2891 5251 1741

For programming, use the same method we used for GE remote as I mentioned above.

Codes for other remotes

  • Onn Remote – 0110, 2458, 1181, 2457, 0012, 0108, 0180, 1833, 1834, 1957, 2000, 4034, 4145, 4033
  • Blackweb – 0110, 2458, 1181, 2457, 0012, 0108, 0180, 1833, 1834, 1957, 2000
  • Comcast – 2235, 4521, 3210, 0001
  • Verizon Fios – 333 [Set up instructions]
  • Sofabaton U1 – Program Via the mobile application
  • Spectrum remote – 11142, 12049, 11480, 11454, 11564, 10088 (New Models), 10054, 11142, 12448 (For old models like 1060BC2/1060BC3) [Program Instructions]


It’s very advantageous to support a universal remote for our smart TV brands. In case, you miss the original TV remote or get it a fault, you can pick from the shelf, and program using the codes.

No worries when you can’t find the code for the remote control brand that you own at your home. Please request our contact form or through the comment section. Because we are always happy to help our audience.

Leave a Comment

Your email address will not be published. Required fields are marked *